The photo above depicts the empty Borneo issued water cooler (it also comes with a hot water dispenser). It is, as I mentioned, empty. Thus, I'll go through the steps of how to refill a standard water cooler.
The first thing to do is to disengage the empty water container. This one contains 5 gallons of water (18.9 liters). It weighs about 19 kg but it's not a problem when it's empty and can be removed with relative ease.
The next step would be to take a full water bottle from your cache of sealed filled water bottles.
It is important to check that the seal on the top of the huge bottle is intact, as the water dispenser pierces the seal in order to access the water. It would cause a minor catastrophe if one attempts to put an open water bottle upside down during the mounting process. This is very important.
Once the integrity check has been done, the bottle should be mounted on the water dispenser by turning it upside down and locking it into the water cooler. There would some gurgling sounds at this point - do not panic - this is normal, as the full water bottle attempts to fill the small cache in the water cooler.
The water cooler is now filled and ready to be used.
The universal blue colored nozzle is used to dispense cold water.
The universal red colored nozzle dispenses hot water.
This is the end of this document.
Leave a comment